This one time I was cleaning an unfinished wood floor and it seemed like such a futile exercise. you can do it yourself, don’t worry, with a few preparations and some natural oil; your floor will be much easier to clean!
In this blog post, we will show you how to clean an unfinished wooden floor in three easy steps using crude oil. And after following them the floor should look great again!
The 3 steps to cleaning an unfinished timber ground using herbal oil
However, cleaning unfinished timber floors is no joke because of that they are natural and free from harmful chemicals. Begin by making a mixture out of 1 part oil and 1 part water. After that use a piece of cloth or mop to cover the entire surface of the floor.
Allow the paste to dry for one hour then scrub the surface with a stiff-bristled brush. lastly, rinse off any residue using soapy hot water. Apply another coat of oil immediately after you have finished washing if you want to keep the flooring oiled against water damage. Hence, this is just an easy three-step process for cleaning unfinished timber floors.
How do you clean unfinished wooden floors?
To clean up not finished hardwood covering:
- Prepare them by sealing them with sealer or waxing.
- Remove dust, dirt or pet hair by sweeping and mopping the ground.
- Take a piece of white vinegar soaked cloth and wipe all surfaces on which you stand.
- Keep rinsing out all lines until there is no sign of vinegar remaining at all.
How unfinished wood flooring emerges as grimy
It can be scary to clean un-finished wooden floors therefore doing it right needs more attention than before thus stick into these simple steps below in order to achieve feet that are cleansed and free from stains:
- Sand away any dust from the ground
- Wash off any grime or oil with soap and water
- Use a cleaner specifically made for wooden floors and clean them properly.
Ensure the floor is completely dry before sealing it to prevent future build-up of dirt.
How does the timber floor finish work?
Cleaning unfinished wooden floors is an overwhelming task, but a little teaching can make it easy. A wood floor finish acts like a sealant that protects the wood from mop or bucket. The end needs to be wetted frequently to keep it supple and flexible; this can often be done with a mop or a bucket.
If you ever need to remove the finish, use a professional cleanser; never use water! ensure your furniture is bolted down so it won’t shift when wiping off the finish. finally remember that wood floor finish is a sealed floor and should be treated as such; for instance don’t walk on it without shoes!
Read More: Ultimate Guide on How to Clean Floor Tile Grout
Frequently Asked Questions
How do you clean completed timber flooring?
For cleaning wooden floors, the process gets even simpler especially if you follow some laid out order. Start off by using cloth soaked in water to wipe all surfaces of the timber.
Subsequently take mild detergent on microfiber cloths and clean into all crevices in ground Finally rinse the surface with cold water.
What are the pleasant techniques for cleaning unfinished timber floors?
However, there are several basic suggestions which will enable you to wash unfinished hardwood in just a few minutes. 1. Preparing the surface: Firstly spray disinfectant over incomplete flooring and scrub using brush to get them cleaned up.
In case of stained floor, prepare ammonia mix with water then pour it over area of washing stain. 2. cleaning with Ammonia and Water: After cleaning your floor properly let it dry then rinse using clean water only until dry again.
Conclusion
Your Unfinished Wood Floors Need Cleaning Now! Using natural oils, this blog explains how you can easily unfinish your wooden floors following its simple three-step procedure.
This method will not only clean your floor atmoisture but also give it a beautiful shine afterward which means you should stop thinking and start cleaning up today.
